From ac300757f612e5153b767ae37cffaedfb386e789 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Gero=20Schw=C3=A4ricke?= Date: Sun, 9 Mar 2025 11:58:02 +0100 Subject: [PATCH] board/stmicroelectronics/stm32mp135f-dk: fix boot steps in readme MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The instructions in the readme use incorrect connector names. See also the official devkit documentation: https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP135x-DK/Let%27s_start/Unpack_the_STM32MP135x-DK_board#Out-of-the-box_kit Also the board does not show the console on the screen. This may have been a copy & paste oversight from the STM32MP157 readme. Signed-off-by: Gero Schwäricke Signed-off-by: Peter Korsgaard --- board/stmicroelectronics/stm32mp135f-dk/readme.txt | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/board/stmicroelectronics/stm32mp135f-dk/readme.txt b/board/stmicroelectronics/stm32mp135f-dk/readme.txt index 46879f88cf..44472840b3 100644 --- a/board/stmicroelectronics/stm32mp135f-dk/readme.txt +++ b/board/stmicroelectronics/stm32mp135f-dk/readme.txt @@ -27,12 +27,11 @@ Copy the bootable "sdcard.img" onto an microSD card with "dd": Boot the board ============== - (1) Insert the microSD card in connector CN15 + (1) Insert the microSD card in connector CN3 - (2) Plug a micro-USB cable in connector CN11 and run your serial + (2) Plug a micro-USB cable in connector CN10 and run your serial communication program on /dev/ttyACM0. - (3) Plug a USB-C cable in CN6 to power-up the board. + (3) Plug a USB-C cable in CN12 to power-up the board. - (4) The system will start, with the console on UART, but also visible - on the screen. + (4) The system will start, with the console on UART.