At the moment, Buildroot provides genimage v18. However that version
does not yet include the GUID shortcut for 'u-boot-env' partition type.
This convenient change is relatively new (see [1]) and can be expected
in v19. For now, use the GUID value directly.
[1] 3e0a2aea8d
Fixes: 057012eb2c ("configs/orangepi_5_plus: new board")
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds basic support for the new OrangePi 5 Plus board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus-32GB.html
Brief summary of the board features:
- RK3588 Rockchip SoC
- Quad-Core ARM Cortex-A76 Processor 2.4GHz
- Quad-Core ARM Cortex-A55 Processor 1.8GHz
- Mali G610 GPU
- NPU 6 Tops INT4/INT8/INT16/FP16
- LPDDR4x: 8GB/16GB/32GB
- 2x USB 2.0
- 2x USB 3.0
- 2x HDMI out
- PCIe M.2 M-key socket (e.g. for NVMe)
- PCIe M.2 E-key socket (e.g. for WiFi/BT)
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM / CAN / I2S)
- and much much more ...
BSP includes the following components:
- mainline ATF v2.12
- mainline U-Boot v2024.10
- mainline Linux kernel v6.12.x
Unlike all the other boards from board/orangepi directory, this board
is not based on an Allwinner SoC. It is based on Rockchip RK3588 SoC.
So custom scripts and configs are used instead of common options from
the board/orangepi/common directory. Suggested scripts and configs are
based on those of Radxa Rock5B board.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- switch to human readable genimage.cfg partition type uuid
- add ATF hash in custom hash patches
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to:
* Linux LTS 6.12.6
* U-Boot 2024.10
* ATF 2.11
Provide hashes for all above components and enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Increase ext4 rootfs size to fit larger components.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3. Switch to U-Boot 2024.10 and
ATF 2.11. Force check of hashes for Linux kernel, headers, U-Boot, ATF.
Finally, add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3. Switch to U-Boot 2024.10 and
ATF 2.11. Force check of hashes for Linux kernel, headers, U-Boot, ATF.
Increase ext2 partition size to fit new software versions. Finally, add
BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to U-Boot 2024.10.
Force check of hashes for Linux kernel, headers, U-Boot. Finally,
add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to the latest U-Boot
2024.10. Add hashes for Linux kernel/headers and U-Boot. Finally,
add BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- add BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
- remove .checkpackageignore entry
- change linux.hash comment to use upstream hashes
- add missing BR2_GLOBAL_PATCH_DIR
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Switch to the new Linux LTS release 6.12.3 and to the latest U-Boot
2024.10. Tune the patch for xr819 interrupts for the new kernel.
Add hashes for Linux kernel/headers and U-Boot. Finally, add
BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Julien:
- add BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
- remove .checkpackageignore entry
- change linux.hash comment to use upstream hashes
]
Signed-off-by: Julien Olivain <ju.o@free.fr>
ARM_TRUSTED_FIRMWARE_SITE is currently pointing to the deprecated
ARM-software github read-only mirror[0] which is no longer publishing
new tags. They do have a newer github mirror under the TrustedFirmware-A
organization[1] which continues to receive tag updates we could use
however because of the way github generates tarballs changing the SITE
to point to TrustedFormware-A changes the pre-calculated hash values
for every version for everyone.
Without much way around changing all hash values if we want these latest
tags, lets drop the github mirrors and move to the official git
source[2] so we can download real tarballs which shouldn't change even
if the ARM_TRUSTED_FIRMWARE_SITE moves again and hopefully preventing
this from ever happening again.
[2] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/
[1] https://github.com/TrustedFirmware-A/trusted-firmware-a
[0] https://github.com/ARM-software/arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 6.6 and U-Boot to 2024.01.
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
[Romain:
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Switch to extlinux instead of U-Boot boot script. Drop custom
boot script and genimage config. Instead use common orangepi
files from board/orangepi/common.
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This commit allows the Linux kernel patches to be applied with fuzz
factor 0. The fuzz factor specifies how many lines of the patch can be
inexactly matched, so the value 0 requires all lines to be exactly
matched.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This patch adds basic support for the new OrangePi Zero2W board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2W.html
Brief summary of the board features:
- H618 Allwinner SoC
- Quad-Core ARM Cortex-A53 Processor 1.5GHz
- Mali G31 MP2 GPU
- LPDDR4: 1GB/2GB/4GB
- Wi-Fi5.0+BT 5.0
- 2x Type-C USB 2.0
- 1x Mini HDMI
- Wi-Fi 5.0 + BT 5.0
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM)
- 24-pin expansion interface (2x USB 2.0 / ETH / IR / audio)
BSP includes the following components:
- mainline ATF v2.10
- mainline U-Boot v2024.04
- mainline Linux kernel v6.8
No custom scripts required: all is covered by common orangepi scripts.
However new option BR2_DOWNLOAD_FORCE_CHECK_HASHES requires checksums
for all the BSP components. They are added as board specific patches.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The boot partition is not an EFI System Partition, it is a normal FAT
formatted partition, so using type F instead of U makes more sense.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to extlinux instead of U-Boot boot script. Drop custom boot
script and genimage config. Instead use common orangepi files from
board/orangepi/common. To help extlinux to find DTB without U-Boot
environment changes, do not strip arm64 board specific directory
from DTB name when installing it in /boot directory. For this
purpose use BR2_KERNEL_DTB_KEEP_DIRNAME config option. Finally,
tidy up configuration file adding section names.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Switch to common orangepi scenario for multiple boards (board/orangepi/common) to create an SD image.
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch SD image from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Changes:
* Exclude FAT partition, it is no longer needed for U-Boot.
* Switch the rootfs partition from MBR to GPT for partition-uuid to work.
* Switch to extlinux, this is convenient for debugging.
* Create common scenarios for multiple boards to create an SD image:
board/orangepi/common. Currently only orangepi_zero makes use of the
common infrastructure.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: remove rootfs size = 63M and remount rw]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RK3399_ROCKPRO64 has been picked from pine64/rockpro64 but here we deal
with orangepi-rk3399, so let's change the label to RK3399_ORANGEPI.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The mmc block device number can vary, so passing a mmc block device to
specify the location of the rootfs is not a reliable
approach. Instead, use the root=PARTUUID=<uuid> mechanism, where the
uuid is found by U-Boot.
Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
To fix the first genimage error report, change 'partition-type' entries
to the appropriate 'partition-type-uuid'. Then genimage starts to
complain about overlaps:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole.
To fix the second genimage error report, update the size of bootloader
file. Do not reserve additional space for GPT partition table since
new genimage is able to keep track of it.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006300
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Genimage 15 deprecated the gpt option and now prints a warning when it is
used:
INFO: hdimage(sdcard.img): The option 'gpt' is deprecated. Use 'partition-table-type' instead
So change the genimage configuration files to use that instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1865935239
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type
So change to partition-type-uuid instead. With that fixed, genimage-15 then
also complains about the overlap between the u-boot partition and the GPT:
ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000)
So adjust the u-boot partition to end just before the GPT.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported by check-package (by calling it directly):
generate your patches with 'git format-patch -N'
Change all affected files using this command:
$ sed 's,^\(Subject: *\[PATCH\)[^]]*,\1,g' \
-i $(find * -name '*.patch' -type f)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
