mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-08-01 21:23:51 -09:00
322e8d8451
BSH SMM M2 (SystemMaster M2) Board is an add-on board which provides input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance. Board support package includes the following components: - mainline Linux kernel 6.1.68 - mainline U-Boot 2023.10 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> [Romain: - enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files - enable BR2_KERNEL_HEADERS_AS_KERNEL for linux-headers to avoid specify BR2_KERNEL_HEADERS_6_1 - make sure to use uuu from HOST_DIR in flash.sh ] Signed-off-by: Romain Naour <romain.naour@smile.fr>
68 lines
1.4 KiB
Plaintext
68 lines
1.4 KiB
Plaintext
i.MX6ULZ BSH SMM M2
|
||
==================
|
||
|
||
This tutorial describes how to use the predefined Buildroot
|
||
configuration for the i.MX6ULZ BSH SMM M2 board.
|
||
|
||
Building
|
||
--------
|
||
|
||
Configure buildroot:
|
||
|
||
$ make imx6ulz_bsh_smm_m2_defconfig
|
||
|
||
Change settings to fit your needs (optional):
|
||
|
||
$ make menuconfig
|
||
|
||
Compile everything and build the rootfs image:
|
||
|
||
$ make
|
||
|
||
|
||
Result of the build
|
||
-------------------
|
||
|
||
After building, the output/images directory contains:
|
||
|
||
output/images/
|
||
├── imx6ulz-bsh-smm-m2.dtb
|
||
├── zImage
|
||
├── nand-full.lst
|
||
├── rootfs.ubifs
|
||
└── u-boot-with-spl.imx
|
||
|
||
Preparing the board
|
||
-------------------
|
||
|
||
Plug the USB type A to micro B cable into the USB Debug
|
||
Connector (DBG UART). Use serial port settings 115200 8N1
|
||
to access the debug console.
|
||
|
||
Plug another USB type A to micro B cable into the USB-OTG
|
||
Connector (USB1). This connection is used to flash the board
|
||
firmware using the Freescale/NXP UUU tool.
|
||
|
||
Connect the power supply/adaptor to the DC Power Jack (labelled
|
||
+5V).
|
||
|
||
|
||
Flashing
|
||
--------
|
||
|
||
Power up the board by switching on the Power ON Switch, which is
|
||
placed right next to the DC Jack.
|
||
|
||
Enter the following U-Boot commands on the debug serial console:
|
||
|
||
$ nand erase.chip
|
||
$ reset
|
||
|
||
Flash the built images directly to board’s memory. On your computer,
|
||
run:
|
||
|
||
$ board/bsh/imx6ulz-bsh-smm-m2/flash.sh output/
|
||
|
||
It will flash the bootloader, the Device Tree Blob, the kernel image
|
||
and the UBI root file system.
|