mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-08-01 21:23:51 -09:00
930a6d9470
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi PC2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi PC2 link:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-PC-2.html
Sunxi Wiki link:
https://linux-sunxi.org/Xunlong_Orange_Pi_PC_2
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make orangepi_pc2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi PC2 and power it up. The console
is on the serial line, 115200 8N1.