mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-08-08 00:20:38 -09:00
a37c958238
This commit: - updates the Kernel from 6.10.14 to 6.18.4 - updates arm-trusted-firmware from v2.11 to v2.14 - updates U-Boot from 2024.10 to 2026.01 - switches to Bootlin external glibc stable toolchain - removes hash for linux-headers (no longer needed) In order to reduce the differences with the rockpro64_ebbr_defconfig, this commit also: - slightly increases the rootfs size from 120M to 128M, - unsets the rootfs tar archive which is not needed, - removes rootfs.tar from board/pine64/rockpro64/readme.txt Tested on board Rockpro64_V2.1 2018-07-02. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Vincent Stehlé <vincent.stehle@arm.com> Signed-off-by: Julien Olivain <ju.o@free.fr>
PINE64 ROCKPro64 ================ https://www.pine64.org/rockpro64/ Build: ====== $ make rockpro64_defconfig $ make Files created in output directory ================================= output/images ├── bl31.elf ├── boot.vfat ├── extlinux ├── idbloader.img ├── Image ├── rk3399-rockpro64.dtb ├── rootfs.ext2 ├── rootfs.ext4 -> rootfs.ext2 ├── sdcard.img ├── u-boot.bin └── u-boot.itb Creating bootable SD card: ========================== Simply invoke (as root) sudo dd if=output/images/sdcard.img of=/dev/sdX && sync Where X is your SD card device. Booting: ======== RockPro64 has a 40-pin PI-2 GPIO Bus. Connect a jumper between pin 23 and pin 25 for SD card boot. Serial console: --------------- The pin layout for serial console on PI-2 GPIO Bus is as follows: pin 6: gnd pin 8: tx pin 10: rx Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the power is on then connect pin 10(receive). Baudrate for this board is 1500000. Login: ------ Enter 'root' as login user, and the prompt is ready. https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html