mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-08-01 21:23:51 -09:00
ac300757f6
The instructions in the readme use incorrect connector names. See also the official devkit documentation: https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP135x-DK/Let%27s_start/Unpack_the_STM32MP135x-DK_board#Out-of-the-box_kit Also the board does not show the console on the screen. This may have been a copy & paste oversight from the STM32MP157 readme. Signed-off-by: Gero Schwäricke <gero.schwaericke@sevenlab.de> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
STM32MP135F Discovery Kit
Intro
=====
This configuration supports the STM32MP135F Discovery Kit (DK)
platform:
https://www.st.com/en/evaluation-tools/stm32mp135f-dk.html
How to build
============
$ make stm32mp135f_dk_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card in connector CN3
(2) Plug a micro-USB cable in connector CN10 and run your serial
communication program on /dev/ttyACM0.
(3) Plug a USB-C cable in CN12 to power-up the board.
(4) The system will start, with the console on UART.