mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-08-01 21:23:51 -09:00
487416dfe5
Now that the configurations of boards stm32mp157a-dk1 and stm32mp157c-dk2 have the same software versions, it is possible to share the hash files as well. The patch uses the hash files for Arm Trusted Firmware, Linux, Linux headers and U-Boot of stm32mp175a_dk1 also for stm32mp175c_dk2, and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the defconfig from .checkpackageignore. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
STM32MP157A Discovery Kit v1
Intro
=====
This configuration supports the STM32MP157 Discovery Kit 1 (DK1)
platform:
https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html
How to build
============
$ make stm32mp157a_dk1_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card in connector CN15
(2) Plug a micro-USB cable in connector CN11 and run your serial
communication program on /dev/ttyACM0.
(3) Plug a USB-C cable in CN6 to power-up the board.
(4) The system will start, with the console on UART, but also visible
on the screen.