mirror of
https://gitlab.com/buildroot.org/buildroot.git
synced 2026-08-01 21:23:51 -09:00
6614e2f9da
This patch bumps the versal_vck190_defconfig to xilinx-v2024.1 which includes the following updates: - Linux v6.6.10 - U-Boot v2024.01 - ATF v2.10 - PLM xilinx-v2024.1 - PSMFW xilinx-v2024.1 Removed ATF patches that were needed for ATF v2.8. Signed-off-by: Neal Frager <neal.frager@amd.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
******************************************
Xilinx VCK190 board - Versal
******************************************
This document describes the Buildroot support for the VCK190
board by Xilinx, based on Versal. It has been tested with the
VCK190 production board.
Evaluation board features can be found here with the link below.
VCK190:
https://www.xilinx.com/products/boards-and-kits/vck190.html
How to build it
===============
Configure Buildroot:
$ make versal_vck190_defconfig
Compile everything and build the rootfs image:
$ make
Result of the build
-------------------
After building, you should get a tree like this:
output/images/
+-- boot.bin
+-- boot.vfat
+-- Image
+-- rootfs.ext2
+-- rootfs.ext4 -> rootfs.ext2
+-- sdcard.img
+-- system.dtb -> versal-vck190-rev1.1.dtb
`-- versal-vck190-rev1.1.dtb
How to write the SD card
========================
WARNING! This will destroy all the card content. Use with care!
The sdcard.img file is a complete bootable image ready to be written
on the boot medium. To install it, simply copy the image to an SD
card:
# dd if=output/images/sdcard.img of=/dev/sdX
Where 'sdX' is the device node of the SD.
Eject the SD card, insert it in the board, and power it up.